Supor膜的AcroPak 200囊式过滤器

对多达20L的液体进行有效过滤

●Supor膜具有高流速和高处理量，适用于要求低蛋白质吸附的溶液。不建议将其用于某些酮。

●内置的预过滤膜在处理黏性液体或者充满颗粒的液体（比如包含乳浆的介质）的过程中能够增加过滤器的使用寿命。

●上游排气孔可以防止气阻。

●在生产过程中没有使用粘合剂，从而*大限度的降低了可萃取物的污染。

●通过γ射线灭菌，消除可能因EtO残留物而导致的污染。

应用

●适合对小体积到中体积样品灭菌过滤。

●适合用于低浓度蛋白质、防腐剂或者其它重要成分的液体过滤。

●能够对培养介质和缓冲液进行灭菌过滤。

Materials of Construction

·                             Filter Media: Supor [hydrophilic polyethersulfone (PES)] membrane

·                             Housing, Vent Plug, and Support Material: Polypropylene

·                             Sealing Technology: Thermal bonding

·                             Filling Pore Size

·                             0.8/0.2 μm

Effective Filtration Area

·                             200 cm²

Dimensions (Nominal)

·                             Overall Length: 10.5 cm (4.1 in.)

·                             Housing Diameter With Vent: 6.7 cm (2.6 in.)

·                             Housing Diameter Without Vent: 5.3 cm (2.1 in.)

Inlet/Outlet Connections

·                             6.4 - 12.7 mm (1/4 - 1/2 in.) stepped hose barb with filling bellShielding=left>Typical Hold-Up Volume (with air purge)

·                             < 6 mL

Maximum Operating Temperature

·                             60 °C (140 °F) at 2.1 bar (210 kPa, 30 psi)

Maximum Operating Pressure

·                             4.1 bar (410 kPa, 60 psi) at ambient temperature

Recommended Integrity Test Minimum Bubble Point – Water

·                             3.5 bar (350 kPa, 51 psi)

Typical Water Flow Rate (1 cp)

·                             mL/min at 0.1 bar (10 kPa): 300 mL/min/psi: 207

Bacterial Retention

·                             Endotoxin Level

·                             < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test

Biological Safety

·                             Passes Sterilization

·                             Sterilized by gamma irradiation and individually packaged

订购信息

带有Supor膜的AcoPak 200囊式过滤器

产品编号	说明	包装
12941	0.8/0.2µm，灭菌包装，带有防护罩	3个/包装