Super膜的AcroPak 20过滤器

●Super膜具有高流速和高处理量，适用于要求低蛋白质吸附的溶液。不建议将其用于某些酮。

●能够对多达5L的化学和生物液体进行处理。

●通过γ射线灭菌，消除可能因EtO残留物而导致的污染。

●上游排气可以防止气阻。

●内置的预过滤膜在处理黏性液体或者充满颗粒的液体（比如包含乳浆的介质）的过程中能够增加过滤器的使用寿命。

应用

●进行小体积和中等体积样品灭菌和澄清过滤。

●适合用于低浓度蛋白质、防腐剂或者其它重要成分的液体。

●能够对培养介质和缓冲液进行灭菌过滤。

规格

Materials of Construction

·                             Filter Media: Supor [hydrophilic polyethersulfone (PES)] membrane

·                             Housing, Vent Plug: Polypropylene

·                             Sealing Technology: Thermal bonding

·                             Filling Pore Size

·                             0.8/0.2 μm

Effective Filtration Area

·                             20 cm²

Dimensions

·                             Housing Length: 8.3 cm (3.3 in.)

·                             Housing Diameter: 6.7 cm (2.7 in.)

Inlet/Outlet Connections

·                             6.4 - 12.7 mm (1/4 - 1/2 in.) diameter stepped hose barb with female luer slip interior and filling bell outlet

Typical Hold-Up Volume

·                             < 2.5 mL

Maximum Operating Temperature and Pressure

·                             60 °C (140 °F) at 1.0 bar (100 kPa, 15 psi)

·                             4.1 bar (410 kPa, 60 psi) at 21 - 24 °C (70 - 75 °F)

Recommended Integrity Test Minimum Bubble Point - Water

·                             3.5 bar (350 kPa, 51 psi)

Typical Water Flow Rate

·                             mL/min at 0.1 bar (10 kPa): 40 mL/min/psi: 28

Bacterial Retention

·                             Endotoxin Level

·                             < 0.25 EU/mL using Limulus Amoebocyte Lysate (LAL) test

Biological Safety

·                             Passes Sterilization

·                             Can withstandShielding=left>·                             PN 12203 is sterilized by gamma irradiation and individually packaged

订购信息

Supor膜的AcroPak 20过滤器

产品编号	说明	包装
12202	0.8/0.2µm，未灭菌，带有防护罩	3个/包装
12203	0.8/0.2µm，灭菌包装，带有防护罩	3个/包装